服务器日志分析命令大全 - 吴钧泽博客

1,719 阅读5分钟
原文链接: wujunze.com

自己的小网站跑在阿里云的ECS上面,偶尔也去分析分析自己网站服务器日志,看看网站的访问量。看看有没有黑阔搞破坏!于是收集,整理一些服务器日志分析命令,大家可以试试!

1、查看有多少个IP访问:

awk '{print $1}' log_file|sort|uniq|wc -l

2、查看某一个页面被访问的次数:

grep "/index.php" log_file | wc -l

3、查看每一个IP访问了多少个页面:

awk '{++S[$1]} END {for (a in S) print a,S[a]}' log_file > log.txt

sort -n -t ' ' -k 2 log.txt 配合sort进一步排序

4、将每个IP访问的页面数进行从小到大排序

awk '{++S[$1]} END {for (a in S) print S[a],a}' log_file | sort -n

5、查看某一个IP访问了哪些页面:

grep ^111.111.111.111 log_file| awk '{print $1,$7}'

6、去掉搜索引擎统计的页面:

awk '{print $12,$1}' log_file | grep ^\"Mozilla | awk '{print $2}' |sort | uniq | wc -l

7、查看2015年8月16日14时这一个小时内有多少IP访问:

awk '{print $4,$1}' log_file | grep 16/Aug/2015:14 | awk '{print $2}'| sort | uniq | wc -l

8、查看访问前十个ip地址

awk '{print $1}' |sort|uniq -c|sort -nr |head -10 access_log

uniq -c 相当于分组统计并把统计数放在最前面
cat access.log|awk '{print $1}'|sort|uniq -c|sort -nr|head -10

cat access.log|awk '{counts[$(11)]+=1}; END {for(url in counts) print counts[url], url}

9、访问次数最多的10个文件或页面

cat log_file|awk '{print $11}'|sort|uniq -c|sort -nr | head -10

cat log_file|awk '{print $11}'|sort|uniq -c|sort -nr|head -20

awk '{print $1}' log_file |sort -n -r |uniq -c | sort -n -r | head -20
访问量最大的前20个ip

10、通过子域名访问次数,依据referer来计算,稍有不准

cat access.log | awk '{print $11}' | sed -e ' s/http:\/\///' -e ' s/\/.*//' | sort | uniq -c | sort -rn | head -20

11、列出传输大小最大的几个文件

cat www.access.log |awk '($7~/\.php/){print $10 " " $1 " " $4 " " $7}'|sort -nr|head -100

12、列出输出大于200000byte(约200kb)的页面以及对应页面发生次数

cat www.access.log |awk '($10 > 200000 && $7~/\.php/){print $7}'|sort -n|uniq -c|sort -nr|head -100

13、如果日志最后一列记录的是页面文件传输时间,则有列出到客户端最耗时的页面

cat www.access.log |awk '($7~/\.php/){print $NF " " $1 " " $4 " " $7}'|sort -nr|head -100

14、列出最最耗时的页面(超过60秒的)的以及对应页面发生次数

cat www.access.log |awk '($NF > 60 && $7~/\.php/){print $7}'|sort -n|uniq -c|sort -nr|head -100

15、列出传输时间超过 30 秒的文件

cat www.access.log |awk '($NF > 30){print $7}'|sort -n|uniq -c|sort -nr|head -20

16、列出当前服务器每一进程运行的数量,倒序排列

ps -ef | awk -F ' ' '{print $8 " " $9}' |sort | uniq -c |sort -nr |head -20

17、查看apache当前并发访问数

对比httpd.conf中MaxClients的数字差距多少
netstat -an | grep ESTABLISHED | wc -l

18、可以使用如下参数查看数据

ps -ef|grep httpd|wc -l

1388
统计httpd进程数,连个请求会启动一个进程,使用于Apache服务器。
表示Apache能够处理1388个并发请求,这个值Apache可根据负载情况自动调整

netstat -nat|grep -i "80"|wc -l

4341
netstat -an会打印系统当前网络链接状态,而grep -i "80"是用来提取与80端口有关的连接的,wc -l进行连接数统计。
最终返回的数字就是当前所有80端口的请求总数

netstat -na|grep ESTABLISHED|wc -l

376
netstat -an会打印系统当前网络链接状态,而grep ESTABLISHED 提取出已建立连接的信息。 然后wc -l统计
最终返回的数字就是当前所有80端口的已建立连接的总数。

netstat -nat||grep ESTABLISHED|wc

可查看所有建立连接的详细记录

19、输出每个ip的连接数,以及总的各个状态的连接数
netstat -n | awk '/^tcp/ {n=split($(NF-1),array,":");if(n<=2)++S[array[(1)]];else++S[array[(4)]];++s[$NF];++N} END {for(a in S){printf("%-20s %s\n", a, S[a]);++I}printf("%-20s %s\n","TOTAL_IP",I);for(a in s) printf("%-20s %s\n",a, s[a]);printf("%-20s %s\n","TOTAL_LINK",N);}'

20、其他的收集

分析日志文件下 2012-05-04 访问页面最高 的前20个 URL 并排序

cat access.log |grep '04/May/2012'| awk '{print $11}'|sort|uniq -c|sort -nr|head -20

查询受访问页面的URL地址中 含有 www.abc.com 网址的 IP 地址

cat access_log | awk '($11~/\www.abc.com/){print $1}'|sort|uniq -c|sort -nr

获取访问最高的10个IP地址 同时也可以按时间来查询

cat linewow-access.log|awk '{print $1}'|sort|uniq -c|sort -nr|head -10

****时间段查询日志时间段的情况****

cat log_file | egrep '15/Aug/2015|16/Aug/2015' |awk '{print $1}'|sort|uniq -c|sort -nr|head -10

分析2015/8/15 到 2015/8/16 访问"/index.php?g=Member&m=Public&a=sendValidCode"的IP倒序排列

cat log_file | egrep '15/Aug/2015|16/Aug/2015' | awk '{if($7 == "/index.php?g=Member&m=Public&a=sendValidCode") print $1,$7}'|sort|uniq -c|sort -nr

($7~/.php/) $7里面包含.php的就输出,本句的意思是最耗时的一百个PHP页面

cat log_file |awk '($7~/\.php/){print $NF " " $1 " " $4 " " $7}'|sort -nr|head -100

列出最最耗时的页面(超过60秒的)的以及对应页面发生次数

cat access.log |awk '($NF > 60 && $7~/\.php/){print $7}'|sort -n|uniq -c|sort -nr|head -100

统计网站流量(G)

cat access.log |awk '{sum+=$10} END {print sum/1024/1024/1024}'

统计404的连接

awk '($9 ~/404/)' access.log | awk '{print $9,$7}' | sort

统计http status

cat access.log |awk '{counts[$(9)]+=1}; END {for(code in counts) print code, counts[code]}'
cat access.log |awk '{print $9}'|sort|uniq -c|sort -rn

每秒并发

watch "awk '{if($9~/200|30|404/)COUNT[$4]++}END{for( a in COUNT) print a,COUNT[a]}' log_file|sort -k 2 -nr|head -n10"

带宽统计

cat apache.log |awk '{if($7~/GET/) count++}END{print "client_request="count}'
cat apache.log |awk '{BYTE+=$11}END{print "client_kbyte_out="BYTE/1024"KB"}'

找出某天访问次数最多的10个IP

cat /tmp/access.log | grep "20/Mar/2011" |awk '{print $3}'|sort |uniq -c|sort -nr|head

当天ip连接数最高的ip都在干些什么

cat access.log | grep "10.0.21.17" | awk '{print $8}' | sort | uniq -c | sort -nr | head -n 10

小时单位里ip连接数最多的10个时段

awk -vFS="[:]" '{gsub("-.*","",$1);num[$2" "$1]++}END{for(i in num)print i,num[i]}' log_file | sort -n -k 3 -r | head -10

找出访问次数最多的几个分钟

awk '{print $1}' access.log | grep "20/Mar/2011" |cut -c 14-18|sort|uniq -c|sort -nr|head
取5分钟日志
if [ $DATE_MINUTE != $DATE_END_MINUTE ] ;then #则判断开始时间戳与结束时间戳是否相等
START_LINE=sed -n "/$DATE_MINUTE/=" $APACHE_LOG|head -n1 #如果不相等,则取出开始时间戳的行号,与结束时间戳的行号

查看tcp的链接状态

netstat -nat |awk '{print $6}'|sort|uniq -c|sort -rn 
     
netstat -n | awk '/^tcp/ {++S[$NF]};END {for(a in S) print a, S[a]}' 
 
netstat -n | awk '/^tcp/ {++state[$NF]}; END {for(key in state) print key,"\t",state[key]}' 
     
netstat -n | awk '/^tcp/ {++arr[$NF]};END {for(k in arr) print k,"\t",arr[k]}' 
     
netstat -n |awk '/^tcp/ {print $NF}'|sort|uniq -c|sort -rn 
     
netstat -ant | awk '{print $NF}' | grep -v '[a-z]' | sort | uniq -c
netstat -ant|awk '/ip:80/{split($5,ip,":");++S[ip[1]]}END{for (a in S) print S[a],a}' |sort -n 
     
netstat -ant|awk '/:80/{split($5,ip,":");++S[ip[1]]}END{for (a in S) print S[a],a}' |sort -rn|head -n 10 
     
awk 'BEGIN{printf ("http_code\tcount_num\n")}{COUNT[$10]++}END{for (a in COUNT) printf a"\t\t"COUNT[a]"\n"}'

查找请求数前20个IP(常用于查找攻来源):
netstat -anlp|grep 80|grep tcp|awk '{print $5}'|awk -F: '{print $1}'|sort|uniq -c|sort -nr|head -n20
netstat -ant |awk '/:80/{split($5,ip,":");++A[ip[1]]}END{for(i in A) print A[i],i}' |sort -rn|head -n20

用tcpdump嗅探80端口的访问看看谁最高

tcpdump -i eth0 -tnn dst port 80 -c 1000 | awk -F"." '{print $1"."$2"."$3"."$4}' | sort | uniq -c | sort -nr |head -20

查找较多time_wait连接

netstat -n|grep TIME_WAIT|awk '{print $5}'|sort|uniq -c|sort -rn|head -n20

找查较多的SYN连接

netstat -an | grep SYN | awk '{print $5}' | awk -F: '{print $1}' | sort | uniq -c | sort -nr | more

根据端口列进程
netstat -ntlp | grep 80 | awk '{print $7}' | cut -d/ -f1

查看了连接数和当前的连接数

netstat -ant | grep $ip:80 | wc -l
netstat -ant | grep $ip:80 | grep EST | wc -l

查看IP访问次数
netstat -nat|grep ":80"|awk '{print $5}' |awk -F: '{print $1}' | sort| uniq -c|sort -n

Linux命令分析当前的链接状况
netstat -n | awk '/^tcp/ {++S[$NF]} END {for(a in S) print a, S[a]}'

watch "netstat -n | awk '/^tcp/ {++S[\$NF]} END {for(a in S) print a, S[a]}'" # 通过watch可以一直监控

LAST_ACK 5 #关闭一个TCP连接需要从两个方向上分别进行关闭,双方都是通过发送FIN来表示单方向数据的关闭,当通信双方发送了最后一个FIN的时候,发送方此时处于LAST_ACK状态,当发送方收到对方的确认(Fin的Ack确认)后才真正关闭整个TCP连接;
 
SYN_RECV 30  # 表示正在等待处理的请求数;
 
ESTABLISHED 1597 # 表示正常数据传输状态; 
 
FIN_WAIT1 51 # 表示server端主动要求关闭tcp连接; 
 
FIN_WAIT2 504 # 表示客户端中断连接; 
 
TIME_WAIT 1057  # 表示处理完毕,等待超时结束的请求数; 

附录

一月 Jan January
二月 Feb February
三月 Mar March
四月 Apr April
五月 May May
六月 June June
七月 July July
八月 Aug Aguest
九月 Sept September
十月 Oct October
十一月 Nov November
十二月 Dec December

仓促成文,不当之处,在所难免,尚盼读者,多加指正