iOS 算法之排序、查找、递归

1,906

排序

  • 冒泡排序(依次循环旁边的比较放到后边去)
/**
 最好时间复杂度是O(n)
 最坏时间复杂度是O(n^2)
 平均时间复杂度:O(n^2)
 平均空间复杂度:O(1)
 */
- (void)foolSortArray:(NSMutableArray *)array {
    for (int i = 0; i < array.count-1; i++) {
        for (int j = 0; j < array.count-i-1; j++) {
            if (array[j] > array[j+1]) {
                id tmp = array[j];
                array[j] = array[j+1];
                array[j+1] = tmp;
            }
        }
    }
}
  • 选择排序(拿前边的和后边的依次比较放到前边去,就是先排好前边的)
/**
 最好时间复杂度是O(n^2)
 最坏时间复杂度是O(n^2)
 平均时间复杂度:O(n^2)
 平均空间复杂度:O(1)
 */
- (void)selectSortArray:(NSMutableArray *)array {
    for (int i = 0; i < array.count-1; i++) {
        for (int j = i+1; j < array.count; j++) {
            if (array[i] > array[j]) {
                id tmp = array[i];
                array[i] = array[j];
                array[j] = tmp;
            }
        }
    }
}
  • 插入排序
- (void)insertSortArray:(NSMutableArray *)array {
    for (int i = 1; i < [array count]; i++) {
        int j = i;
        NSInteger temp = [[array objectAtIndex:i] integerValue];
        while (j > 0 && temp < [[array objectAtIndex:j - 1] integerValue]) {
            [array replaceObjectAtIndex:j withObject:[array objectAtIndex:(j - 1)]];
            j--;
        }
        [array replaceObjectAtIndex:j withObject:[NSNumber numberWithInteger:temp]];
    }
}
  • 希尔排序

    希尔排序是把记录按下标的一定增量分组,对每组使用直接插入排序算法排序;随着增量逐渐减少,每组包含的关键词越来越多,当增量减至1时,整个文件恰被分成一组,算法便终止。`

    增量: 插入排序只能与相邻的元素进行比较,而希尔排序则是进行跳跃比较,而增量就是步长。

/**
 最优的增量在最坏的情况下却为O(n²⁄³),最坏的情况下时间复杂度仍为O(n²)
 需要注意的是,增量序列的最后一个增量值必须等于1才行
 另外由于记录是跳跃式的移动,希尔排序并不是一种稳定的排序算法
 */
- (void)shellSortArray:(NSMutableArray *)array {
    int count = (int)array.count;
    // 初始增量为数组长度的一半,然后每次除以2取整
    for (int increment = count/2; increment > 0; increment/=2) {
        // 初始下标设为第一个增量的位置,然后递增
        for (int i = increment; i<count; i++) {
            // 获取当前位置
            int j = i;
            // 然后将此位置之前的元素,按照增量进行跳跃式比较
            while (j-increment>=0 && [array[j] integerValue]<[array[j-increment] integerValue]) {
                [array exchangeObjectAtIndex:j withObjectAtIndex:j-increment];
                j-=increment;
            }
        }
    }
}
  • 快速排序
/**
 最理想情况算法时间复杂度O(nlogn),最坏O(n^2),平均O(nlogn)
 平均空间复杂度:O(nlogn)       O(nlogn)~O(n^2)
 */
- (void)quickSortArray:(NSMutableArray *)array withLeftIndex:(NSInteger)leftIndex andRightIndex:(NSInteger)rightIndex {
    if (leftIndex >= rightIndex) { // 如果数组长度为0或1时返回
        return ;
    }
    
    NSInteger i = leftIndex;
    NSInteger j = rightIndex;
    NSInteger key = [array[i] integerValue]; // 记录比较基准数
    
    while (i < j) {
        /**** 首先从右边j开始查找比基准数小的值 ***/
        while (i < j && [array[j] integerValue] >= key) { // 如果比基准数大,继续查找
            j--;
        }
        // 如果比基准数小,则将查找到的小值调换到i的位置
        array[i] = array[j];
        
        /**** 当在右边查找到一个比基准数小的值时,就从i开始往后找比基准数大的值 ***/
        while (i < j && [array[i] integerValue] <= key) { // 如果比基准数小,继续查找
            i++;
        }
        // 如果比基准数大,则将查找到的大值调换到j的位置
        array[j] = array[i];
        
    }
    
    // 将基准数放到正确位置
    array[i] = @(key);
    
    /**** 递归排序 ***/
    // 排序基准数左边的
    [self quickSortArray:array withLeftIndex:leftIndex andRightIndex:i - 1];
    // 排序基准数右边的
    [self quickSortArray:array withLeftIndex:i + 1 andRightIndex:rightIndex];
}
  • 堆排序

    堆(英语:heap)是计算机科学中一类特殊的数据结构的统称
    堆总是满足下列性质: 1. 堆中某个节点的值总是不大于或不小于其父节点的值; 2. 堆总是一棵完全二叉树
    将根节点最大的堆叫做最大堆或大根堆,根节点最小的堆叫做最小堆或小根堆

    完全二叉树

    若设二叉树的深度为h,除第 h 层外,其它各层 (1~h-1) 的结点数都达到最大个数,第 h 层所有的结点都连续集中在最左边,这就是完全二叉树。

/**
 时间复杂度为O(nlogn)
 */
- (void)heapSortArray:(NSMutableArray *)heapList len:(NSInteger)len {
    // 建立堆,从最底层的父节点开始
    for(NSInteger i = (heapList.count/2 -1); i>=0; i--)
        [self adjustHeap:heapList location:i len:heapList.count];
    
    for(NSInteger i = heapList.count -1; i >= 0; i--){
        NSInteger maxEle = ((NSString *)heapList[0]).integerValue;
        heapList[0] = heapList[i];
        heapList[i] = @(maxEle).stringValue;
        
        [self adjustHeap:heapList location:0 len:i];
    }
}

- (void)adjustHeap:(NSMutableArray *)heapList location:(NSInteger)p len:(NSInteger)len {
    NSInteger curParent = ((NSString *)heapList[p]).integerValue;
    NSInteger child = 2*p + 1;
    while (child < len) {
        // left < right
        if (child+1 < len && ((NSString *)heapList[child]).integerValue < ((NSString *)heapList[child+1]).integerValue) {
            child ++;
        }
        if (curParent < ((NSString *)heapList[child]).integerValue) {
            heapList[p] = heapList[child];
            p = child;
            child = 2*p + 1;
        }
        else
            break;
    }
    heapList[p] = @(curParent).stringValue;
}
  • 归并排序

    归并排序(MERGE-SORT)是建立在归并操作上的一种有效的排序算法,该算法是采用分治法(Divide and Conquer)的一个非常典型的应用。将已有序的子序列合并,得到完全有序的序列;即先使每个子序列有序,再使子序列段间有序。若将两个有序表合并成一个有序表,称为二路归并。

/**
 时间复杂度为O(nlogn)
(1)“分解”——将序列每次折半划分
(2)“合并”——将划分后的序列段两两合并后排序
 */
- (NSArray *)mergeSortArray:(NSMutableArray *)array {
    // 排序数组
    NSMutableArray *tempArray = [NSMutableArray arrayWithCapacity:1];
    // 第一趟排序是的子数组个数为ascendingArr.count
    for (NSNumber *num in array) {
        NSMutableArray *subArray = [NSMutableArray array];
        [subArray addObject:num];
        [tempArray addObject:subArray];
    }
    /**
     分解操作 每一次归并操作
     当数组个数为偶数时tempArray.count/2; 当数组个数为奇数时tempArray.count/2+1; 当tempArray.count == 1时,归并排序完成
     */
    while (tempArray.count != 1) {
        NSInteger i = 0;
        
        // 当数组个数为偶数时 进行合并操作, 当数组个数为奇数时,最后一位轮空
        while (i < tempArray.count - 1) {
            
            // 将i 与i+1 进行合并操作 将合并结果放入i位置上 将i+1位置上的元素删除
            tempArray[i] = [self mergeArrayFirstList:tempArray[i] secondList:tempArray[i + 1]];
            [tempArray removeObjectAtIndex:i + 1];
            
            // i++ 继续下一循环的合并操作
            i++;
        }
    }

    return tempArray.copy;
}
// 合并
- (NSArray *)mergeArrayFirstList:(NSArray *)array1 secondList:(NSArray *)array2 {
    
    // 合并序列数组
    NSMutableArray *resultArray = [NSMutableArray array];
    
    // firstIndex是第一段序列的下标 secondIndex是第二段序列的下标
    NSInteger firstIndex = 0, secondIndex = 0;
    
    // 扫描第一段和第二段序列,直到有一个扫描结束
    while (firstIndex < array1.count && secondIndex < array2.count) {
        // 判断第一段和第二段取出的数哪个更小,将其存入合并序列,并继续向下扫描
        if ([array1[firstIndex] floatValue] < [array2[secondIndex] floatValue]) {
            [resultArray addObject:array1[firstIndex]];
            firstIndex++;
        } else {
            [resultArray addObject:array2[secondIndex]];
            secondIndex++;
        }
    }
    // 若第一段序列还没扫描完,将其全部复制到合并序列
    while (firstIndex < array1.count) {
        [resultArray addObject:array1[firstIndex]];
        firstIndex++;
    }
    // 若第二段序列还没扫描完,将其全部复制到合并序列
    while (secondIndex < array2.count) {
        [resultArray addObject:array2[secondIndex]];
        secondIndex++;
    }
    // 返回合并序列数组
    return resultArray.copy;
}

二分查找

/**
 二分查找法只适用于已经排好序的查找
 */
- (NSInteger)dichotomySearch:(NSArray *)array target:(id)key {
    NSInteger left = 0;
    NSInteger right = [array count] - 1;
    NSInteger middle = [array count] / 2;
    
    while (right >= left) {
        middle = (right + left) / 2;
        
        if (array[middle] == key) {
            return middle;
        }
        
        if (array[middle] > key) {
            right = middle - 1;
        }else if (array[middle] < key) {
            left = middle + 1;
        }
    }
    return -1;
}

递归

  • 斐波那契数列问题
- (NSInteger)recursion0:(NSInteger) n {
    if (n <= 1) return n;
    return [self recursion0:n-1] + [self recursion0:n-2];
}
  • 阶乘
- (NSInteger)recursion1: (NSInteger)n {
    if (n == 0) { //递归边界
        return 1;
    }
    return n*[self recursion1:(n-1)];//递归公式
}

链表反转

public ListNode ReverseList(ListNode head){
    if(head == null || head.next == null){
        return head;
    }

    ListNode p1 = head;
    ListNode p2 = head.next;
    ListNode p3 = null;

    while(p2 != null){
        p3 = p2.next;
        p2.next = p1;
        p1 = p2;
        p2 = p3;
    }
    head.next = null;
    head = p1;
    return head;
}

Demo 位置:知识点->算法