Typescript+Vue大型项目构建+详细讲解

14,833 阅读13分钟

写在前面

在开撸之前,先把文档网址贴一贴

Typescript 中文手册

vue-property-decorator

vuex-class

vue-class-component

先来认识下面的小玩意

vue-property-decorator

这里单页面组件的书写采用的是 vue-property-decorator 库,该库完全依赖于 vue-class-component ,也是 vue 官方推荐的库。

单页面组件中,在 @Component({}) 里面写 propsdata 等调用起来极其不方便,而 vue-property-decorator里面包含了 8 个装饰符则解决了此类问题,他们分别为:

  • @Emit 指定事件emit,可以使用此修饰符,也可以直接使用 this.$emit()
  • @Inject 指定依赖注入
  • @Mixins mixin 注入
  • @Model 指定 model
  • @Prop 指定 Prop
  • @Provide 指定 Provide
  • @Watch 指定 Watch
  • @Component export from vue-class-component

举个🌰

import {
  Component, Prop, Watch, Vue
} from 'vue-property-decorator'

@Component
export class MyComponent extends Vue {
  dataA: string = 'test'
  count = 0
  
  @Prop({ default: 0 }) private propA!: number
  @Prop({ default: () => [10, 20, 30, 50] }) private propB!: number[]
  @Prop({ default: 'total, sizes, prev, pager, next, jumper' }) private propC!: string
  @Prop({ default: true }) private propD!: boolean,
  @prop([String, Boolean]) propE: string | boolean;
  
  @Emit('reset')
  resetCount() {
    this.count = 0
  }
  @Emit()
  returnValue() {
    return 10
  }
  @Emit()
  onInputChange(e) {
    return e.target.value
  }
  
  // watcher
  @Watch('child')
  onChildChanged (val: string, oldVal: string) {}
  @Watch('person', { immediate: true, deep: true })
  onPersonChanged (val: Person, oldVal: Person) {}

  // 其他修饰符详情见上面的 github 地址,这里就不一一做说明了
}

解析之后会变成

export default {
  data () {
    return {
      dataA: 'test'
    }
  },
  props: {
    propA: {
	  type: Number
    },
    propB: {
      type: Array,
      default: [10, 20, 30, 50]
    },
    propC: {
      type: String,
      default: 'total, sizes, prev, pager, next, jumper'
    },
    propD: {
      type: String,
      default: 'total, sizes, prev, pager, next, jumper'
    },
    propE: {
      type: [String, Boolean]
  },
    
  watch: {
    'child': {
      // handler:其值是一个回调函数。即监听到变化时应该执行的函数。
      handler: 'onChildChanged',
      // immediate:其值是true或false;immediate:true代表如果在 wacth
      // 里声明了之后,就会立即先去执行里面的handler方法,如果为
      // false就跟我们以前的效果一样,不会在绑定的时候就执行
      immediate: false,
      // deep:其值是true或false;确认是否深入监听。deep的意思就是深入观
      // 察,监听器会一层层的往下遍历,给对象的所有属性都加上这个监听器(
      // 受现代 JavaScript 的限制 (以及废弃 Object.observe),Vue 
      // 不能检测到对象属性的添加或删除)
      deep: false
    },
    'person': {
      handler: 'onPersonChanged',
      immediate: true,
      deep: true
    }
  },
  methods: {
     resetCount() {
      this.count = 0
      this.$emit('reset')
    },
    
    returnValue() {
      this.$emit('return-value', 10)
    },
    
    onInputChange(e) {
      this.$emit('on-input-change', e.target.value, e)
    }
 
    onChildChanged (val, oldVal) {},
    onPersonChanged (val, oldVal) {}
  }
}

这里有两个常用修饰符!``?,!和可选参数?是相对的, !表示强制解析(也就是告诉typescript编译器,我这里一定有值),你写?的时候再调用,typescript会提示可能为undefined

@Emit

@Emit装饰器的函数会在运行之后触发等同于其函数名(驼峰式会转为横杠式写法)的事件, 并将其函数传递给$emit

  • @Emit()不传参数,那么它触发的事件名就是它所修饰的函数名.
  • @Emit(name: string),里面传递一个字符串,该字符串为要触发的事件名

@Watch

watch 是一个对象,对象就有键,有值。

  • 第一个handler:其值是一个回调函数。即监听到变化时应该执行的函数。
  • 第二个是deep:其值是truefalse;确认是否深入监听。deep的意思就是深入观察,监听器会一层层的往下遍历,给对象的所有属性都加上这个监听器(受现代 JavaScript 的限制 (以及废弃 Object.observe),Vue不能检测到对象属性的添加或删除)
  • 第三个是immediate:其值是truefalseimmediate:true代表如果在 wacth 里声明了之后,就会立即先去执行里面的handler方法,如果为 false就跟我们以前的效果一样,不会在绑定的时候就执行

@Watch使用非常简单,接受第一个参数为要监听的属性名, 第二个属性为可选对象。@Watch所装饰的函数即监听到属性变化之后应该执行的函数。 @Watch装饰的函数的函数名并非如上onStateChanged严格命名,它是多元化的,你可以随心所欲的命名,当然,能按照规范化的命名会使你的代码阅读性更好。

@Minxins

// myMixin.ts
import { Vue, Component } from 'vue-property-decorator';
declare module 'vue/types/vue' {
    interface Vue {
        mixinValue: string;
    }
}
@Component
export default class myMixins extends Vue {
    mixinValue: string = 'Hello World!!!'
}

引用

import { Vue, Component, Prop } from 'vue-property-decorator';
import MyMixin from './myMixin.js'

@Component({
    mixins: [MyMixin]
})
export default class extends Vue{
    created(){
        console.log(mixinValue) // => Hello World!!!
    }
}

mixin另一写法,在下面会有出现。

@Model

@Model装饰器允许我们在一个组件上自定义v-model,接收两个参数:

  • event: string 事件名。
  • options: Constructor | Constructor[] | PropOptions 与@Prop的第一个参数一致。
import { Vue, Component, Model } from 'vue-property-decorator'

@Component
export default class MyInput extends Vue {
  @Model('change', { type: String, default: 'Hello world!!!' }) readonly value!: string
}

等同于

<template>
  <input
    type="text"
    :value="value"
    @change="$emit('change', $event.target.value)"
  />
</template>

export default {
  model: {
    prop: 'value',
    event: 'change'
  },
  props: {
    value: {
      type: String,
      default: 'Hello world!!!'
    }
  }
}

@Provide @Inject

@Provide 声明一个值 , 在其他地方用@Inject 接收,在实战项目中用得不多,一般用于不依赖于任何第三方状态管理库(如vuex)的组件编写

@Ref(refKey?: string)

@Ref装饰器接收一个可选参数,用来指向元素或子组件的引用信息。如果没有提供这个参数,会使用装饰器后面的属性名充当参数

import { Vue, Component, Ref } from 'vue-property-decorator'
import { Form } from 'element-ui'

@Componentexport default class MyComponent extends Vue {
  @Ref() readonly loginForm!: Form
  @Ref('changePasswordForm') readonly passwordForm!: Form

  public handleLogin() {
    this.loginForm.validate(valide => {
      if (valide) {
        // login...
      } else {
        // error tips
      }
    })
  }
}

等同于

export default {
  computed: {
    loginForm: {
      cache: false,
      get() {
        return this.$refs.loginForm
      }
    },
    passwordForm: {
      cache: false,
      get() {
        return this.$refs.changePasswordForm
      }
    }
  }
}

搭建环境

创建项目

? Please pick a preset:(使用上下箭头)
 ◯ default (babel, eslint)        //默认配置
❯◉ Manually select features       //手动选择
? Check the features needed for your project:
 ◉ Babel                                    // javascript转译器
 ◉ TypeScript                               // 使用 TypeScript 书写源码
 ◯ Progressive Web App (PWA) Support        // 渐进式WEB应用
 ◉ Router                                   // 使用vue-router
 ◉ Vuex                                     // 使用vuex
 ◉ CSS Pre-processors                       // 使用css预处理器
❯◉ Linter / Formatter                       // 代码规范标准
 ◯ Unit Testing                             // 单元测试
 ◯ E2E Testing                              // e2e测试

是否使用class风格的组件语法: 使用前:home = new Vue()创建vue实例 使用后:class home extends Vue{}

? Use class-style component syntax? (Y/n) Y

// 使用Babel与TypeScript一起用于自动检测的填充
? Use Babel alongside TypeScript (required for modern mode, auto-detected polyfills, transpiling JSX)? (Y/n) Y

// 路由
? Use history mode for router? (Requires proper server setup for index fallback in production) (Y/n) Y

// 预处理器
? Pick a CSS pre-processor (PostCSS, Autoprefixer and CSS Modules are supported by default): (Use arrow keys)
❯◉ Sass/SCSS (with dart-sass)    // 保存后编译
 ◯ Sass/SCSS (with node-sass)    // 实时编译 
 ◯ Less
 ◯ Stylus

// 代码格式化检测
? Pick a linter / formatter config: (Use arrow keys)
 ◯ ESLint with error prevention only     // 只进行报错提醒
 ◯ ESLint + Airbnb config                // 不严谨模式
 ◯ ESLint + Standard config              // 正常模式
 ◯ ESLint + Prettier                     // 严格模式
❯◉ TSLint(deprecated)                    // typescript格式验证工具

// 代码检查方式
? Pick additional lint features: (Press <space> to select, <a>
to toggle all, <i> to invert selection)
❯◉ Lint on save             // 保存检查
 ◯ Lint and fix on commit   // commit时fix

// 文件配置
? Where do you prefer placing config for Babel, ESLint, etc.? (
Use arrow keys)
  In dedicated config files // 配置在独立的文件中
❯ In package.json
  
// 保存上述配置,保存后下一次可直接根据上述配置生成项目
? Save this as a preset for future projects? (y/N) N

// 创建成功
🎉  Successfully created project vue-typescript-admin-demo.

yarn run serve运行项目之后会报一堆莫名的错误,这都是 tslint.json 搞的鬼,配置一下重新运行即可

// tsconfig.json
Error: Calls to 'console.log' are not allowed.

Error: 去除行尾必加';'

Error: 禁止自动检测末尾行必须使用逗号,always总是检测,never从不检测,ignore忽略检测

"rules": {
    "no-console": false,
    "semicolon": [
        false,
        "always"
    ],
    "trailing-comma": [true, {
        "singleline": "never",
        "multiline": {
            "objects": "ignore",
            "arrays": "ignore",
            "functions": "never",
            "typeLiterals": "ignore"
        }
    }]
}

至此,整个项目算是正常运行起来了。But... 这还是传统的Vue项目,我们要开发的是Vue+ts实战项目,所以需要改造一番,详细的目录结构,等改造完之后再附上吧。

目录结构

这是改造后的目录结构

├── public                          // 静态页面
├── scripts                         // 相关脚本配置
├── src                             // 主目录
    ├── assets                      // 静态资源
    ├── api                         // axios封装
    ├── filters                     // 过滤
    ├── lib                         // 全局插件
    ├── router                      // 路由配置
    ├── store                       // vuex 配置
    ├── styles                      // 样式
    ├── types                       // 全局注入
    ├── utils                       // 工具方法(全局方法等)
    ├── views                       // 页面
    ├── App.vue                     // 页面主入口
    ├── main.ts                     // 脚本主入口
    ├── registerServiceWorker.ts    // PWA 配置
├── tests                           // 测试用例
├── .editorconfig                   // 编辑相关配置
├── .npmrc                          // npm 源配置
├── .postcssrc.js                   // postcss 配置
├── babel.config.js                 // preset 记录
├── cypress.json                    // e2e plugins
├── f2eci.json                      // 部署相关配置
├── package.json                    // 依赖
├── README.md                       // 项目 readme
├── tsconfig.json                   // ts 配置
├── tslint.json                     // tslint 配置
└── vue.config.js                   // webpack 配置

主要涉及 shims-tsx.d.tsshims-vue.d.ts 两个文件

  • shims-tsx.d.ts,允许你以 .tsx 结尾的文件,在 Vue 项目中编写 jsx代码
  • shims-vue.d.ts 主要用于 TypeScript 识别 .vue文件, ts 默认并不支持导入 .vue文件,这个文件告诉 ts 导入.vue 文件都按 VueConstructor<Vue> 处理。

tslint添加如下配置

// tslint.json
// 不检测隐式类型
{
  "defaultSeverity": "none", // 值为warn时为警告
	"rules": {
		...
  }
  "arrow-parens": [
	false,
	"as-needed"
  ]
}

其他内容配置(自选)

// tslint.json
{
  "defaultSeverity": "warning",
  "extends": [
    "tslint:recommended"
  ],
  "linterOptions": {
    "exclude": [
      "node_modules/**"
    ]
  },
  "rules": {
    "quotemark": false, // 字符串文字需要单引号或双引号。
    "indent": false, // 使用制表符或空格强制缩进。
    "member-access": false, // 需要类成员的显式可见性声明。
    "interface-name": false, // 接口名要求大写开头
    "ordered-imports": false, // 要求将import语句按字母顺序排列并进行分组。
    "object-literal-sort-keys": false, // 检查对象文字中键的排序。
    "no-consecutive-blank-lines": false, // 不允许连续出现一个或多个空行。
    "no-shadowed-variable": false, // 不允许隐藏变量声明。
    "no-trailing-whitespace": false, // 不允许在行尾添加尾随空格。
    "semicolon": false, // 是否分号结尾
    "trailing-comma": false, // 是否强象添加逗号
    "eofline": false, // 是否末尾另起一行
    "prefer-conditional-expression": false, // for (... in ...)语句必须用if语句过滤
    "curly": true, //for if do while 要有括号
    "forin": false, //用for in 必须用if进行过滤
    "import-blacklist": true, //允许使用import require导入具体的模块
    "no-arg": true, //不允许使用 argument.callee
    "no-bitwise": true, //不允许使用按位运算符
    "no-console": false, //不能使用console
    "no-construct": true, //不允许使用 String/Number/Boolean的构造函数
    "no-debugger": true, //不允许使用debugger
    "no-duplicate-super": true, //构造函数两次用super会发出警告
    "no-empty": true, //不允许空的块
    "no-eval": true, //不允许使用eval
    "no-floating-promises": false, //必须正确处理promise的返回函数
    "no-for-in-array": false, //不允许使用for in 遍历数组
    "no-implicit-dependencies": false, //不允许在项目的package.json中导入未列为依赖项的模块
    "no-inferred-empty-object-type": false, //不允许在函数和构造函数中使用{}的类型推断
    "no-invalid-template-strings": true, //警告在非模板字符中使用${
    "no-invalid-this": true, //不允许在非class中使用 this关键字
    "no-misused-new": true, //禁止定义构造函数或new class
    "no-null-keyword": false, //不允许使用null关键字
    "no-object-literal-type-assertion": false, //禁止object出现在类型断言表达式中
    "no-return-await": true, //不允许return await
    "arrow-parens": false, //箭头函数定义的参数需要括号
    "adjacent-overload-signatures": false, //  Enforces function overloads to be consecutive.
    "ban-comma-operator": true, //禁止逗号运算符。
    "no-any": false, //不需使用any类型
    "no-empty-interface": true, //禁止空接口 {}
    "no-internal-module": true, //不允许内部模块
    "no-magic-numbers": false, //不允许在变量赋值之外使用常量数值。当没有指定允许值列表时,默认允许-1,0和1
    "no-namespace": [true, "allpw-declarations"], //不允许使用内部modules和命名空间
    "no-non-null-assertion": true, //不允许使用!后缀操作符的非空断言。
    "no-parameter-reassignment": true, //不允许重新分配参数
    "no-reference": true, // 禁止使用/// <reference path=> 导入 ,使用import代替
    "no-unnecessary-type-assertion": false, //如果类型断言没有改变表达式的类型就发出警告
    "no-var-requires": false, //不允许使用var module = require("module"),用 import foo = require('foo')导入
    "prefer-for-of": true, //建议使用for(..of)
    "promise-function-async": false, //要求异步函数返回promise
    "max-classes-per-file": [true, 2], // 一个脚本最多几个申明类
    "variable-name": false,
    "prefer-const": false // 提示可以用const的地方
  }
}

世界顿时清净了~~~ 有硬需要的朋友可以自行打开,前提是一定要配置好tslint规则,否则还是有点痛苦不堪的,毕竟warn多了看着难受。告辞

./src/config/index.ts

/** 
 * 线上环境
 */
export const ONLINEHOST: string = 'https://xxx.com'

/** 
 * 测试环境
 */
export const QAHOST: string = 'http://xxx.com'

/** 
 * 线上mock
 */
export const MOCKHOST: string = 'http://xxx.com'

/** 
 * 是否mock
 */
export const ISMOCK: boolean = true

/**
 * 当前的host  ONLINEHOST | QAHOST | MOCKHOST
 */
export const MAINHOST: string = ONLINEHOST

/**
 * 请求的公共参数
 */
export const conmomPrams: any = {}

/**
 * @description token在Cookie中存储的天数,默认1天
 */
export const cookieExpires: number = 1

./src/utils/common.ts

// 下载js-cookie
cnpm i js-cookie --S
cnpm install @types/js-cookie --D

import Cookies from 'js-cookie'
import { cookieExpires } from '@/config' // cookie保存的天数

/**
 * @Author: asheng
 * @msg: 存取token
 * @param {string} token
 */
export const TOKEN_KEY: string = 'token'
export const setToken = (token: string) => {
  Cookies.set(TOKEN_KEY, token, { expires: cookieExpires || 1 })
}
export const getToken = () => {
  const token = Cookies.get(TOKEN_KEY)
  if (token) {
    return token
  } else {
    return false
  }
}

/**
 * @param {String} url
 * @description 从URL中解析参数
 */
export const getParams = (url: string) => {
  const keyValueArr = url.split('?')[1].split('&')
  let paramObj: any = {}
  keyValueArr.forEach(item => {
    const keyValue = item.split('=')
    paramObj[keyValue[0]] = keyValue[1]
  })
  return paramObj
}

/**
 * 判断一个对象是否存在key,如果传入第二个参数key,则是判断这个obj对象是否存在key这个属性
 * 如果没有传入key这个参数,则判断obj对象是否有键值对
 */
export const hasKey = (obj: any, key: string | number) => {
  if (key) {
    return key in obj
  } else {
    const keysArr = Object.keys(obj)
    return keysArr.length
  }
}

/**
 * @msg: 获取系统当前时间
 * @param {string} fmt 时间格式 具体看代码
 * @return: string
 */
export const getDate = (fmt: any) => {
  let time = ''
  const date = new Date()
  const o: any = {
    "M+": date.getMonth() + 1, // 月份 
    "d+": date.getDate(), // 日 
    "H+": date.getHours(), // 小时 
    "m+": date.getMinutes(), // 分 
    "s+": date.getSeconds(), // 秒 
    "q+": Math.floor((date.getMonth() + 3) / 3), // 季度 
    "S": date.getMilliseconds() // 毫秒 
  }
  if (/(y+)/.test(fmt)) {
    time = fmt.replace(RegExp.$1, (date.getFullYear() + "").substr(4 - RegExp.$1.length))
  }
  for (const k in o) {
    if (new RegExp("(" + k + ")").test(fmt)) {
      time = fmt.replace(RegExp.$1, (RegExp.$1.length === 1) ? (o[k]) : (("00" + o[k]).substr(("" + o[k]).length)))
    }
  }
  return time
}

/**
 * @msg: 获取系统当前时间
 * @param {string} date 时间
 * @param {string} fmt 时间格式
 * @return: string
 */
export const formatDate = (date: any, fmt: string) => {
  let time = ''
  const o: any = {
    "M+": date.getMonth() + 1, // 月份 
    "d+": date.getDate(), // 日 
    "H+": date.getHours(), // 小时 
    "m+": date.getMinutes(), // 分 
    "s+": date.getSeconds(), // 秒 
    "q+": Math.floor((date.getMonth() + 3) / 3), // 季度 
    "S": date.getMilliseconds() // 毫秒 
  }
  if (/(y+)/.test(fmt)) {
    time = fmt.replace(RegExp.$1, (date.getFullYear() + "").substr(4 - RegExp.$1.length))
  }
  for (const k in o) {
    if (new RegExp("(" + k + ")").test(fmt)) {
      time = fmt.replace(RegExp.$1, (RegExp.$1.length === 1) ? (o[k]) : (("00" + o[k]).substr(("" + o[k]).length)))
    }
  }
  return time
}

// copy in the 'fx-fuli' utils
/**
 * 校验手机号是否正确
 * @param phone 手机号
 */

export const verifyPhone = (phone: string | number) => {
  const reg = /^1[34578][0-9]{9}$/
  const _phone = phone.toString().trim()
  let toastStr = _phone === '' ? '手机号不能为空~' : !reg.test(_phone) && '请输入正确手机号~'
  return {
    errMsg: toastStr,
    done: !toastStr,
    value: _phone
  }
}

export const verifyStr = (str: string | number, text: string) => {
  const _str = str.toString().trim()
  const toastStr = _str.length ? false : `请填写${text}~`
  return {
    errMsg: toastStr,
    done: !toastStr,
    value: _str
  }
}

// 截取字符串
export const sliceStr = (str: any, sliceLen: number) => {
  if (!str) { return '' }
  let realLength = 0
  const len = str.length
  let charCode = -1
  for (let i = 0; i < len; i++) {
    charCode = str.charCodeAt(i)
    if (charCode >= 0 && charCode <= 128) {
      realLength += 1
    } else {
      realLength += 2
    }
    if (realLength > sliceLen) {
      return `${str.slice(0, i)}...`
    }
  }

  return str
}


/**
 * JSON 克隆
 * @param {Object | Json} jsonObj json对象
 * @return {Object | Json} 新的json对象
 */
export function objClone(jsonObj: any) {
  let buf: any
  if (jsonObj instanceof Array) {
    buf = []
    let i = jsonObj.length
    while (i--) {
      buf[i] = objClone(jsonObj[i])
    }
    return buf
  } else if (jsonObj instanceof Object) {
    buf = {}
    for (let k in jsonObj) {
      buf[k] = objClone(jsonObj[k])
    }
    return buf
  } else {
    return jsonObj
  }
}

一、巧用Webpack

Webpack是实现我们前端项目工程化的基础,但其实她的用处远不仅仅如此,我们可以通过Webpack来帮我们做一些自动化的事情。首先我们要了解require.context()这个API

require.context()

您可以使用require.context()函数创建自己的上下文。 它允许您传入一个目录进行搜索,一个标志指示是否应该搜索子目录,还有一个正则表达式来匹配文件。

其实是Webpack通过解析 require()的调用,提取出来如下这些信息:

Directory: ./template
Regular expression: /^.*\.ejs$/

然后来创建我们自己的上下文,什么意思呢,就是我们可以通过这个方法筛选出来我们需要的文件并且读取

/**
* @param directory 要搜索的文件夹目录不能是变量,否则在编译阶段无法定位目录
* @param useSubdirectories  是否搜索子目录
* @param regExp 匹配文件的正则表达式
* @return function 返回一个具有 resolve, keys, id 三个属性的方法
          resolve() 它返回请求被解析后得到的模块 id
          keys() 它返回一个数组,由所有符合上下文模块处理的请求组成。 
          id 是上下文模块里面所包含的模块 id. 它可能在你使用 module.hot.accept 的时候被用到
*/
require.context('.', useSubdirectories = false, regExp = /\.js$/)
// (创建了)一个包含了 demo 文件夹(不包含子目录)下面的、所有文件名以 `js` 结尾的、能被 require 请求到的文件的上下文。

这么讲,是否觉得抽象,接下来我们应用下这个小东西。

二、路由

对于Vue中的路由,大家都很熟悉,类似于声明式的配置文件,其实已经很简洁了。现在我们来让他更简洁

分割路由

router                           // 路由文件夹
  |__index.ts                    // 路由组织器:用来初始化路由等等
  |__common.ts                   // 通用路由:声明通用路由
  |__modules                     // 业务逻辑模块:所以的业务逻辑模块
        |__index.ts              // 自动化处理文件:自动引入路由的核心文件
        |__home.ts               // 业务模块home:业务模块

modules

modules文件夹中存放着我们所有的业务逻辑模块,至于业务逻辑模块怎么分,我相信大家自然有自己的一套标准。我们通过上面提到的require.context()接下来编写自动化的核心部分index.js。

const files: any = require.context('.', false, /\.ts/)

let configRouters: Array<any> = []

files.keys().forEach((key) => {
  if (key === './index.ts') {
    return
  }
  configRouters = configRouters.concat(files(key).default)
})

export default configRouters

common

common路由处理 我们的项目中有一大堆的公共路由需要处理比如404阿,503阿等等路由我们都在common.ts中进行处理。

export default [
  {
    path: '/',
    name: 'Login',
    // redirect: '/Login',
    component: Login
  },
  {
    path: '*',
    name: 'Lost',
    component: () => import('@/views/404.vue')
  }
]

路由初始化 这是我们的最后一步了,用来初始化我们的项目路由

import Vue from 'vue'
import Router from 'vue-router'
import ConfigRouters from './modules'
import Common from './common'
// 由于是网站开发,这个是进度条,具体开百度了解一下
import NProgress from 'nprogress'
import 'nprogress/nprogress.css'
import { getToken } from '@/utils/common'

Vue.use(Router)

const router = new Router({
  // mode: "history",
  // base: process.env.BASE_URL,
  scrollBehavior() {
    return { x: 0, y: 0 }
  },
  routes: ConfigRouters.concat(Common)
})

// 登陆页面路由 name
const LOGIN_PAGE_NAME = 'Login'

// 跳转之前
router.beforeEach((to, from, next) => {
  NProgress.start()
  const token = getToken()
  if (!token && to.name !== LOGIN_PAGE_NAME) {
    // 未登录且要跳转的页面不是登录页
    next({
      name: LOGIN_PAGE_NAME // 跳转到登录页
    })
  } else if (!token && to.name === LOGIN_PAGE_NAME) {
    // 未登陆且要跳转的页面是登录页
    next() // 跳转
  } else if (token && to.name === LOGIN_PAGE_NAME) {
    // 已登录且要跳转的页面是登录页
    next({
      name: 'Home' // 跳转到 index 页
    })
  } else {
    if (token) {
      next() // 跳转
    } else {
      next({
        name: LOGIN_PAGE_NAME
      })
    }
  }
})

router.afterEach(() => {
  NProgress.done() // finish progress bar
})
export default router

三、充分利用Nodejs

放着node这么好得东西不用真是有点浪费,那么我们来看看node能为我们增加效率做出什么贡献。

有这么一个场景,我们每次创建模块的时候都要新建一个vue文件和对应的router配置,而且新页面的大部分东西都还差不多,还得去复制粘贴别得页面。这想想就有点low。那既然有了node我们可不可以通过node来做这写乱七八糟得事情? 下面来把我们的想法付诸于显示。

./scripts/template.js
const fs = require('fs')
const path = require('path')
const basePath = path.resolve(__dirname, '../src')

const dirName = process.argv[2]
const capPirName = dirName.substring(0, 1).toUpperCase() + dirName.substring(1)
if (!dirName) {
    console.log('文件夹名称不能为空!')
    console.log('示例:npm run tep ${capPirName}')
    process.exit(0)
}

/**
 * @msg: vue页面模版
 */
const VueTep = `<template>
  <div class="${dirName}-wrap">
    {{data.pageName}}
  </div>
</template>

<script lang="ts" src="./${dirName}.ts"></script>

<style lang="scss">
  @import './${dirName}.scss'
</style>

`

// ts 模版
const tsTep = `import { Component, Vue } from "vue-property-decorator"
import { Getter, Action } from "vuex-class"
import { ${capPirName}Data } from '@/types/views/${dirName}.interface'
// import {  } from "@/components" // 组件

@Component({})
export default class About extends Vue {
  // Getter
  // @Getter ${dirName}.author
    
  // Action
  // @Action GET_DATA_ASYN

  // data
  data: ${capPirName}Data = {
    pageName: '${dirName}'
  }

  created() {
    //
  }
    
  activated() {
    //
  }

  mounted() {
    //
  }

  // 初始化函数
  init() {
    //
  }
    
}
`

// scss 模版
const scssTep = `@import "@/assets/scss/variables.scss";

.${dirName}-wrap {
  width: 100%;
}
`

// interface 模版
const interfaceTep = `// ${dirName}.Data 参数类型
export interface ${capPirName}Data {
  pageName: string
}

// VUEX ${dirName}.State 参数类型
export interface ${capPirName}State {
  data?: any
}

// GET_DATA_ASYN 接口参数类型
// export interface DataOptions {}

`

// vuex 模版
const vuexTep = `import { ${capPirName}State } from '@/types/views/${dirName}.interface'
import { GetterTree, MutationTree, ActionTree } from 'vuex'
import * as ${capPirName}Api from '@/api/${dirName}'

const state: ${capPirName}State = {
  ${dirName}: {
   author: undefined
  }
}

// 强制使用getter获取state
const getters: GetterTree<${capPirName}State, any> = {
  author: (state: ${capPirName}State) => state.${dirName}.author
}

// 更改state
const mutations: MutationTree<${capPirName}State> = {
  // 更新state都用该方法
  UPDATE_STATE(state: ${capPirName}State, data: ${capPirName}State) {
    for (const key in data) {
      if (!data.hasOwnProperty(key)) { return }
      state[key] = data[key]
    }
  }
}

const actions: ActionTree<${capPirName}State, any> = {
  UPDATE_STATE_ASYN({ commit, state: ${capPirName}State }, data: ${capPirName}State) {
    commit('UPDATE_STATE', data)
  },
  // GET_DATA_ASYN({ commit, state: LoginState }) {
  //   ${capPirName}.getData()
  // }
}

export default {
  state,
  getters,
  mutations,
  actions
}

`

// api 接口模版
const apiTep = `import Api from '@/utils/request'

export const getData = () => {
  return Api.getData()
}

`

fs.mkdirSync(`${basePath}/views/${dirName}`) // mkdir

process.chdir(`${basePath}/views/${dirName}`) // cd views
fs.writeFileSync(`${dirName}.vue`, VueTep) // vue 
fs.writeFileSync(`${dirName}.ts`, tsTep) // ts
fs.writeFileSync(`${dirName}.scss`, scssTep) // scss

process.chdir(`${basePath}/types/views`); // cd types
fs.writeFileSync(`${dirName}.interface.ts`, interfaceTep) // interface

process.chdir(`${basePath}/store/module`); // cd store
fs.writeFileSync(`${dirName}.ts`, vuexTep) // vuex

process.chdir(`${basePath}/api`); // cd api
fs.writeFileSync(`${dirName}.ts`, apiTep) // api

process.exit(0)
./scripts/component.js
const fs = require('fs')
const path = require('path')
const basePath = path.resolve(__dirname, '../src')

const dirName = process.argv[2]
const capPirName = dirName.substring(0, 1).toUpperCase() + dirName.substring(1)
if (!dirName) {
    console.log('文件夹名称不能为空!')
    console.log('示例:npm run tep ${capPirName}')
    process.exit(0)
}

/**
 * @msg: vue页面模版
 */
const VueTep = `<template>
  <div class="${dirName}-wrap">
    {{data.pageName}}
  </div>
</template>

<script lang="ts" src="./${dirName}.ts"></script>

<style lang="scss">
  @import './${dirName}.scss'
</style>

`

// ts 模版
const tsTep = `import { Component, Vue } from "vue-property-decorator"
import { Getter, Action } from "vuex-class"
import { ${capPirName}Data } from '@/types/views/${dirName}.interface'
// import {  } from "@/components" // 组件

@Component({})
export default class About extends Vue {
  // Getter
  // @Getter ${dirName}.author
    
  // Action
  // @Action GET_DATA_ASYN

  // data
  data: ${capPirName}Data = {
    pageName: '${dirName}'
  }

  created() {
    //
  }
    
  activated() {
    //
  }

  mounted() {
    //
  }

  // 初始化函数
  init() {
    //
  }
    
}
`

// scss 模版
const scssTep = `@import "@/assets/scss/variables.scss";

.${dirName}-wrap {
  width: 100%;
}
`

// interface 模版
const interfaceTep = `// ${dirName}.Data 参数类型
export interface ${capPirName}Data {
  pageName: string
}

// VUEX ${dirName}.State 参数类型
export interface ${capPirName}State {
  data?: any
}

// GET_DATA_ASYN 接口参数类型
// export interface DataOptions {}

`

// vuex 模版
const vuexTep = `import { ${capPirName}State } from '@/types/views/${dirName}.interface'
import { GetterTree, MutationTree, ActionTree } from 'vuex'
import * as ${capPirName}Api from '@/api/${dirName}'

const state: ${capPirName}State = {
  ${dirName}: {
   author: undefined
  }
}

// 强制使用getter获取state
const getters: GetterTree<${capPirName}State, any> = {
  author: (state: ${capPirName}State) => state.${dirName}.author
}

// 更改state
const mutations: MutationTree<${capPirName}State> = {
  // 更新state都用该方法
  UPDATE_STATE(state: ${capPirName}State, data: ${capPirName}State) {
    for (const key in data) {
      if (!data.hasOwnProperty(key)) { return }
      state[key] = data[key]
    }
  }
}

const actions: ActionTree<${capPirName}State, any> = {
  UPDATE_STATE_ASYN({ commit, state: ${capPirName}State }, data: ${capPirName}State) {
    commit('UPDATE_STATE', data)
  },
  // GET_DATA_ASYN({ commit, state: LoginState }) {
  //   ${capPirName}.getData()
  // }
}

export default {
  state,
  getters,
  mutations,
  actions
}

`

// api 接口模版
const apiTep = `import Api from '@/utils/request'

export const getData = () => {
  return Api.getData()
}

`

fs.mkdirSync(`${basePath}/views/${dirName}`) // mkdir

process.chdir(`${basePath}/views/${dirName}`) // cd views
fs.writeFileSync(`${dirName}.vue`, VueTep) // vue 
fs.writeFileSync(`${dirName}.ts`, tsTep) // ts
fs.writeFileSync(`${dirName}.scss`, scssTep) // scss

process.chdir(`${basePath}/types/views`); // cd types
fs.writeFileSync(`${dirName}.interface.ts`, interfaceTep) // interface

process.chdir(`${basePath}/store/module`); // cd store
fs.writeFileSync(`${dirName}.ts`, vuexTep) // vuex

process.chdir(`${basePath}/api`); // cd api
fs.writeFileSync(`${dirName}.ts`, apiTep) // api

process.exit(0)

使用

cnpm run tep index
cnpm run tep login

我们实现这个功能主要要借助Nodefsprocess, 感兴趣的话可以深入研究一下。

首先我们要编写我们的node脚本,这里是一个比较简单的版本。什么验证文件夹或者文件的都没有,只是来实现我们这个想法:

四、状态管理Vuex

vuex-module-decorators

传统的vuexvue+ts的项目里面是行不通的,vue 2.0版本对ts的兼容性本身并不是特别友好,所以要达到状态管理的效果,这里要额外引用一个类库vuex-module-decorators,它是基于vue-class-component 所做的拓展,它提供了一系列的装饰器,让vue+ts结合的项目达到状态管理的作用。

先来看看要完成的模块化管理的目录结构

.
├─ src/        
│   ├─ store/
│   ├─── modules/
│   │ 		├─ app.ts 
│   │ 		├─ user.ts
│   ├─── index.ts   
import Vue from 'vue'
import Vuex from 'vuex'
import { IAppState } from './modules/app'
import { IUserState } from './modules/user'

Vue.use(Vuex)

export interface IRootState {
    app: IAppState
    user: IUserState
}

// Declare empty store first, dynamically register all modules later.
export default new Vuex.Store<IRootState>({})

等同于

import Vue from 'vue'
import Vuex from 'vuex'
import app from './modules/app'
import user from './modules/user'
Vue.use(Vuex)

const store = new Vuex.Store({
  modules: {
    app,
    user
  }
})

export default store

这样,模块化状态管理的雏形就完成了。对比来看,只是语法风格的变化,其它的变化不大。ts版的状态管理最大的改变体现在各个功能功能函数上

先看一看原始的vuex配置,轻车熟路

export default new Vuex.Store({
    state: {
    },
    mutations: {
    },
    actions: {
    },
    modules: {
    }
});

为了显得不那么啰嗦,直接上版ts版的状态管理吧,可以有个直观的对比

// user.ts
import { VuexModule, Module, Action, Mutation, getModule } from 'vuex-module-decorators'
import store from '@/store'

export interface IUserState {
    id_token: string
}

@Module({ dynamic: true, store, name: 'user' })
class User extends VuexModule implements IUserState {
    public id_token = ''
    
    @Mutation
    private SET_TOKEN(token: string) {
        this.id_token = token
    }
    
    @Action
    public async Login(params: any) {
        this.SET_TOKEN(`token!!!`)
    }
}

export const UserModule = getModule(User)

Module

定义一个modules,直接使用装饰器@Module 注意:原始的vuex同样有一个名为Module的类,但它不是一个装饰器,所以别用混淆了

@Module({ dynamic: true, store, name: 'user' })

从上面可以看到,我们定义modules不单单用了装饰器,还带了参数值,这个是表明是通过命名空间的形式来使用module,如上,这里的namespaced值即为user

详细vuex命名空间的说明,可以参考vuex命名空间

除了namespaced,我们看到还有另外一个参数值store,它即为主入口页对应的整个vuex模块的store

import store from '@/store'

如果去掉它的话,浏览器会报以下错误

state

这里所有的state属性因为加了tslint都会添加上public修饰,其它的用法都是相似的

Getters

原始的getters计算函数,在这里对应的即使get方法,即

@Module
export default class UserModule extends VuexModule {
  countsNum = 2020
  
  get calculatCount() {
    return countsNum / 2
  }
}

等同于

export default {
  state: {
    countsNum: 2
  },
  getters: {
    calculatCount: (state) => state.countsNum / 2
  }
}

Mutations

@Mutation
private SET_TOKEN(token: string) {
    this.token = token
}

@Mutation
...

等同于

mutations: {
    SET_TOKEN: (state, token) => {
        state.token = token
    },
    ...
}

说明: 两者的区别其实就是语法糖,原始的Mutation同步方法都是定义在mutations内,而ts版的每一个Mutation都要加上装饰器@Mutation修饰

注意: 一旦使用@Mutation装饰某一函数后, 函数内的this上下文即指向当前的state,所以想引用state的值,可以直接this.token访问即可。

Muation函数不可为async函数, 也不能使用箭头函数来定义, 因为在代码需要在运行重新绑定执行的上下文

Action

@Action
public async Login(userInfo: { username: string, password: string}) {
    ...
    this.SET_TOKEN(data.accessToken)
}

等同于

actions: {
    async Login({ commit }, data) {
        ...
        commit('SET_TOKEN', data.accessToken)
    }
}

说明: 异步函数Action和同步函数Mutation使用方法大同小异,区别就是一个是同步,一个是异步,只要做好区分即可

注意

  • 如果需要在action函数中运行耗时很长的任务/函数, 建议将该任务定义为异步函数*(async methods)*
  • 千万不要使用箭头函数=>来定义action函数, 因为在运行时需要动态绑定this上下文

vuex+ts版的配置搭建成功,接下来我们把它运用到项目中来吧,这里抽一个登陆页面的模块做介绍

import {
  VuexModule,
  Module,
  Action,
  Mutation,
  getModule
} from 'vuex-module-decorators'
import { login } from '@/api/users' //调用api方法
import store from '@/store'

//声明user模块的state变量类型
//export interface 只是对一个东西的声明(不能具体的操作)
//export class 导出一个类 类里面可有参数 ,函数,方法(干一些具体的事情)
export interface IUserState {
  id_token: string
}

@Module({ dynamic: true, store, name: 'user' })
class User extends VuexModule implements IUserState {
  public id_token = ''

  @Mutation
  private SET_TOKEN(token: string) {
    //同步存储id_token变量
    this.id_token = token
  }

  @Action
  public async Login(params: any) {
    let { mobilePhone, password } = params
    const { data } = await login({ mobilePhone, password })
    this.SET_TOKEN(`Bearer ${data.id_token}`)
  }
}

export const UserModule = getModule(User)

login页面中调用

import { UserModule } from '@/store/modules/user'

await UserModule.Login({
  ...this.loginForm,
  router: this.$router
})

把路由对象作为参数传过去是为了根据不同的响应状态做判断,当请求成功后,可以直接应用传过来的路由对象参数跳转页面。

router.push('/')

注意: 这一步操作其实是调用了vuexAction操作,即原始的this.$store.commit('action'),但是在vuex+ts项目中,调用异步函数Action,不需要再用this.$store.commit('action')这种方法,引用模块后,直接调用里面的Action方法就好了,同样的,同步的Mutation也是这样调用。这些都要归功于vuex-module-decorators类库的封装 好了,调用Action后粗发Mutation同步操作,保存好token令牌,因为登录之后所有的请求都要把token值放在header头中发起请求 除了vuex状态管理,在项目中可能我们还会结合工具类js-cookie一起使用,管理各种变量的值,具体用法跟原始版没有什么区别,最主要的是安装类库的过程中,还得安装一个开发ts编译版

yarn add js-cookie // dependencies yarn add @types/js-cookie --dev // devDependencies(必装)

注意点

这里使用的是vuex-modulevuex-class还是有不少区别,在下面的内容,使用的是vuex-class

可能有人会有疑问,为什么介绍vuex-module,而使用vuex-class。。。 当初构建项目时,使用的是vuex-class,最近学习到vuex-module,就记录下。

具体vuex-class的使用,文章最开始就把文档贴出来了,也可参考下窝的写法。

vuex-class

vuex-class 是一个基于 VueVuexvue-class-component 的库,和 vue-property-decorator 一样,它也提供了4 个修饰符以及 namespace,解决了 vuex.vue 文件中使用上的不便的问题。

  • @State
  • @Getter
  • @Mutation
  • @Action
  • namespace

到了这里,就不再说明State,Getter...

先来看看要完成的模块化管理的目录结构

.
├─ src/        
│   ├─ store/
│   ├─── modules/
│   │ 	├─ user.ts
│   │ 	├─ index.ts
│   ├─── index.ts   
// ./store/modules/user.ts
import { GetterTree, MutationTree, ActionTree } from 'vuex'
interface LoginState {
  [key: string]: any
}

const state: LoginState = {
  user_id: '1', // 用户id
  authority: 1, // 开户权限
  token: ''
}

// 强制使用getter获取state
const getters: GetterTree<LoginState, any> = {
  getUserId: (state: LoginState) => state.user_id,
  getToken: (state: LoginState) => state.token
}

// 更改state
const mutations: MutationTree<LoginState> = {
  // 更新state都用该方法
  UPDATE_STATE(state: LoginState, data: LoginState) {
    Object.keys(data).forEach((item) => {
      state[item] = data[item]
    })
  }
}

const actions: ActionTree<LoginState, any> = {
  UPDATE_STATE_ASYN({ commit, state: LoginState }, data: LoginState) {
    commit('UPDATE_STATE', data)
  }
}

export default {
  namespaced: true,
  state,
  getters,
  mutations,
  actions
}

// ./store/modules/index.ts
import { ModuleTree } from 'vuex'
const files: any = require.context('.', false, /\.ts$/)

// 这里为了方便演示,重复写了一个接口。
// 个人可放置到 * 目录下,来同一管理接口
interface LoginState {
  [key: string]: any
}

let modules: ModuleTree<any> = {}

files.keys().forEach((key) => {
  if (key === './index.ts') {
    return
  }
  modules[key.replace(/(\.\/|\.ts)/g, '')] = files(key).default
})

export default modules

整理好./store/modules/*下的文件,那么就该到'使用'登场啦。。。

// ./store/index.ts
import Vue from 'vue'
import Vuex from 'vuex'
import modules from './modules'

Vue.use(Vuex)
export default new Vuex.Store({
  modules
})

我们在login.vue下使用康康

...
import { State, Action, namespace } from 'vuex-class'

// 在上面 ./store/modules/user.ts 并使用了命名空间,这里直接使用就行啦
const usreModel = namespace('user')

@Component({})
export default class Login extends Vue {
  // 窝是这样使用
  @usreModel.State((state) => state.user_id) user_id
  @usreModel.State((state) => state.authority) authority
  // 调用user/actions中的UPDATE_STATE_ASYN
  @usreModel.Action('UPDATE_STATE_ASYN') UPDATE_STATE_ASYN
  ...
}

(窝是结束符)...

在来康康官网vuex-class(参考)

import Vue from 'vue'
import Component from 'vue-class-component'
import {
  State,
  Getter,
  Action,
  Mutation,
  namespace
} from 'vuex-class'

const someModule = namespace('path/to/module')

@Component
export class MyComp extends Vue {
  @State('foo') stateFoo
  @State(state => state.bar) stateBar
  @Getter('foo') getterFoo
  @Action('foo') actionFoo
  @Mutation('foo') mutationFoo
  @someModule.Getter('foo') moduleGetterFoo

  // If the argument is omitted, use the property name
  // for each state/getter/action/mutation type
  @State foo
  @Getter bar
  @Action baz
  @Mutation qux

  created () {
    this.stateFoo // -> store.state.foo
    this.stateBar // -> store.state.bar
    this.getterFoo // -> store.getters.foo
    this.actionFoo({ value: true }) // -> store.dispatch('foo', { value: true })
    this.mutationFoo({ value: true }) // -> store.commit('foo', { value: true })
    this.moduleGetterFoo // -> store.getters['path/to/module/foo']
  }
}

注意

这里再次强调,vuex-classvuex-module是两个不同的东西,切勿同时使用,避免人为bug。

五、Mixins

如果我们有大量的表格页面,仔细一扒拉你发现非常多的东西都是可以复用的例如分页,表格高度,加载方法, laoding声明等一大堆的东西。下面我们来整理出来一个简单通用混入index.js

import { Provide, Vue } from 'vue-property-decorator'
import Component from 'vue-class-component'
// 这里使用的是vuex-class,与上面的vuex-module不同,请注意
import { namespace } from 'vuex-class'
import moment from 'moment'

const usreModel = namespace('user')

@Component
export default class MyMixin extends Vue {
  @Provide() public loading: boolean = false
  @Provide() public form: any
  @Provide() public data: Array<any> = []
  @Provide() public pagination: any = {
    defaultPageSize: 6,
    showQuickJumper: true,
    hideOnSinglePage: false
  }

  @usreModel.State(state => state.user_id) user_id
  @usreModel.State(state => state.authority) authority
  
  formatDate(value, format = 'YYYY-MM-DD HH:mm') {
    if (value) {
      return moment(value).format(format)
    }
  }
}

mixins使用

import Component, { mixins } from 'vue-class-component'
import { Vue, Provide } from 'vue-property-decorator'
import MyMixin from '@/mixins'

@Component
export default class Home extends mixins(MyMixin) {
  @Provide() private columns: Object = Columns
  @Provide() private search: string = ''
}

这样就可以正常使用lodingform等数据方法等

注意:全局mixins一定要慎用,如果不是必须要用的话我还是不建议使用。

六、axios的封装

vue项目中,和后台交互获取数据这块,我们通常使用的是axios库,它是基于promisehttp库,可运行在浏览器端和node.js中。他有很多优秀的特性,例如拦截请求和响应、取消请求、转换json、客户端防御XSRF等。所以我们的尤大大也是果断放弃了对其官方库vue-resource的维护,直接推荐我们使用axios库。如果还对axios不了解的,可以移步axios文档。

安装

npm install axios; // 安装axios

引入

一般我会在项目的src目录中,新建一个api文件夹,然后在里面新建一个api.ts和一个requestConfig.ts文件。api.ts文件用来封装我们的axiosrequestConfig.ts用来统一管理我们的接口。

// src/api/api.ts
import axios, { AxiosResponse, AxiosRequestConfig } from 'axios'
// config文件夹往后会出现,这里就不说明了
import { MAINHOST, ISMOCK, QAHOST, conmomPrams } from '@/config' 
// 接口
import requestConfig from './requestConfig'
// 获取存储在 cookies 的 token
import { getToken, removeToken } from '@/utils/common'
// 这里我使用了 antd ,大家根据自己的UI来使用
import { message } from 'ant-design-vue'
// 路由
import router from '@/router'
// 下面两个是加解密文件,因为用的是http,为了安全考虑,使用到这两个。(可忽略)
import apiEncrypt from '@/utils/apiEncrypt'
import apiDecrypt from '@/utils/apiDecrypt'

declare type Methods = 'GET' | 'OPTIONS' | 'HEAD' | 'POST' | 'PUT' | 'DELETE' | 'TRACE' | 'CONNECT'

declare interface Datas {
  method?: Methods
  [key: string]: any
}

// 根据环境,切换请求不同的url
const baseURL = process.env.NODE_ENV === 'production' ? MAINHOST : QAHOST//QAHOST

class HttpRequest {
  public queue: any // 请求的url集合
  public hide: any
  public constructor() {
    this.queue = {}
  }
  destroy(url: string) {
    delete this.queue[url]
    if (!Object.keys(this.queue).length) {
      // 关闭loding
      setTimeout(this.hide, 0)
    }
  }
  interceptors(instance: any, url?: string) {
    // 请求拦截
    instance.interceptors.request.use(
      (config: AxiosRequestConfig) => {
        // 添加全局的loading...
        if (!Object.keys(this.queue).length) {
          // show loading
          this.hide = message.loading('加载中..', 0)
        }
        if (url) {
          this.queue[url] = true
        }
        return config
      },
      (error: any) => {
        console.error(error)
      }
    )
    // 响应拦截
    instance.interceptors.response.use(
      (res: AxiosResponse) => {
        if (url) {
          this.destroy(url)
        }
        let { data, status } = res
        data = apiDecrypt(data)
        if (status === 200 && ISMOCK) {
          return data.result
        } // 如果是mock数据,直接返回
        if (status === 200 && data && data.code === 200) {
          return data.result
        } // 请求成功
        res.data = data
        return requestFail(res) // 失败回调
      },
      (error: any) => {
        if (url) {
          this.destroy(url)
        }
        message.error('服务器出错')
        console.error(error)
      }
    )
  }
  async request(options: AxiosRequestConfig) {
    const instance = axios.create()
    await this.interceptors(instance, options.url)
    return instance(options)
  }
}

// 请求失败
const requestFail = (res: AxiosResponse) => {
  let errStr = '网络繁忙!'

  if (res.data.code) {
    switch (res.data.code) {
      // 401: 未登录
      // 未登录则跳转登录页面,并携带当前页面的路径
      // 在登录成功后返回当前页面,这一步需要在登录页操作。
      case 401:
        router.replace({
          path: '/'
        })
        removeToken()
        break
      // 403 token过期
      // 登录过期对用户进行提示
      // 清除本地token和清空vuex中token对象
      // 跳转登录页面
      case 403:
        // 清除token
        // store.commit('loginSuccess', null);
        // 跳转登录页面,并将要浏览的页面fullPath传过去,登录成功后跳转需要访问的页面
        router.replace({
          path: '/'
        })
        removeToken()
        // localStorage.removeItem('token')
        break
      // 404请求不存在
      case 404:
        ...      
        break
    }
  }
  console.error({
    code: res.data.errcode || res.data.code,
    msg: res.data.errMsg || errStr
  })

  if (typeof res.data.errMsg === 'object') {
    res.data.errMsg = '服务器错误'
  }
  message.error(res.data.errMsg || errStr)
  return null
}

// 合并axios参数
const conbineOptions = (_opts: any, data: Datas, method: Methods): AxiosRequestConfig => {
  let opts = _opts
  if (typeof opts === 'string') {
    opts = { url: opts }
  }
  const _data = { ...conmomPrams, ...opts.data, ...data }
  const options = {
    method: opts.method || data.method || method || 'GET',
    url: opts.url,
    headers: { Authorization: `Bearer${getToken()}` },// 这个需要与后端配合,让后端去除掉Bearer,加上这个是为了(安全考虑)
    baseURL,
    timeout: 10000
  }
  const c = apiEncrypt(_data) // 加密数据
  return options.method !== 'GET' ? Object.assign(options, { data: c }) : Object.assign(options, { params: _data })
}

const HTTP = new HttpRequest()

/**
 * 抛出整个项目的api方法
 */
const Api = (() => {
  const apiObj: any = {}
  const requestList: any = requestConfig
  const fun = (opts: AxiosRequestConfig | string) => {
    return async (data = {}, method: Methods = 'POST') => {
      const newOpts = conbineOptions(opts, data, method)
      const res = await HTTP.request(newOpts)
      return res
    }
  }
  Object.keys(requestConfig).forEach((key) => {
    apiObj[key] = fun(requestList[key])
  })

  return apiObj
})()

export default Api as any

src/api/requestConfig
export default {
  getData: '/mock/5e23f600df5e86413d7f1486/example/upload', // 随机数据 来自 easy mock
}

一些建议

  • 如果定义了 .d.ts 文件,请重新启动服务让你的服务能够识别你定义的模块,并重启 vscode 让编辑器也能够识别(真的恶心)
  • 设置好你的 tsconfig ,比如记得把 strictPropertyInitialization 设为 false,不然你定义一个变量就必须给它一个初始值。
  • 千万管理好你的路由层级,不然到时连正则都拯救不了你 业务层面千万做好类型检测或者枚举定义,这样不仅便利了开发,还能在出了问题的时候迅速定位
  • 跨模块使用 vuex,请直接使用 rootGetters
  • 如果你需要改造某组件库主题,请单开一个文件进行集中管理,别一个组件分一个文件去改动,不然编译起来速度堪忧
  • 能够复用团队其他人开发好的东西,尽量别去开发第二遍,不然到时浪费的可能就不是单纯的开发时间,还有 code review的时间

vue 文件中 TS 上下文顺序

  • data
  • @Prop
  • @State
  • @Getter
  • @Action
  • @Mutation
  • @Watch

生命周期钩子

  • beforeCreate(按照生命周期钩子从上到下)
  • created
  • beforeMount
  • mounted
  • beforeUpdate
  • updated
  • activated
  • deactivated
  • beforeDestroy
  • destroyed
  • errorCaptured(最后一个生命周期钩子)

路由钩子

  • beforeRouteEnter
  • beforeRouteUpdate
  • beforeRouteLeave

computed

methods


分享不易,喜欢的话一定别忘了点💖!!!

只关注不点💖的都是耍流氓,只收藏也不点💖的也一样是耍流氓。

结束👍👍👍。


参考

axios封装(戳窝)

加速vue项目开发速度(戳窝)

TypeScript + 大型项目实战(戳窝)

Typescript+Vue大型后台管理系统实战(戳窝)

vue-cli3.0 搭建项目模版教程(戳窝)